A Calibration Sticker Example

Please Note: This is an example of one form. If you have specific questions about this or other elements, please e-mail your questions to info@realquality.com.

The following example represents a standard Calibration sticker which can either be computer generated or purchased at most office supply companies. The completed sticker must be applied to the instrument indicating fitness for use.

CALIB-2003

Calibration Sticker

Calibration Sticker
Calibrated By: __________________
Date: _________________________
Due Date: _____________________

Rev A. Issue Date: 12/31/99 Approved By: __________________
(Title)

Since the Calibration Sticker is so small and/or purchased, it is possible that the proper identification may not be on the sticker itself, as in the example above.

An acceptable means of controlling such a "form" is to attach it to a sheet of paper indicating: the form number (CALIB-2003 in this case), the revision level, the issue date and the authorizing signature.

This process can be used with most purchased forms so long as the process is defined within the Document Control procedures.

Applied Quality Strategies PO Box 67252 Rochester, NY 14617-7252
Tel: 585-733-7535 Fax: 585-342-8436 Email AQS